Canty Process Technology Short Loop Sampler™ – Oil in Water/Water in Oil Analyzer

The Canty Process Technology Short Loop Sampler™ – Oil in Water/Water in Oil Analyzer combines a pre-designed sample line and sampling point with the InFlow™ Particle Analyzer.

The modular system draws process fluid through the analyzer without product loss, providing concentration and particle-size distribution measurements for oil, water, sand, and gas within the sampled stream.

The short-loop configuration allows one analyzer to evaluate multiple sampling points while supporting laboratory verification of results.

Process Controls Corporation - Canty Process Technology Short Loop Sampler™ – Oil in Water/Water in Oil Analyzer

The system measures particles from 0.7 to 20,000 microns at 30 frames per second and reports concentration in PPM or PPB.

Key Characteristics

Combines a pre-designed sample line and sample point with the InFlow™ Particle Analyzer
Provides real-time concentration and particle-size analysis
Measures particles from 0.7 to 20,000 microns
Captures and analyzes images at 30 frames per second
Reports concentration in PPM or PPB with particle-size distribution
Supports testing from multiple process sampling points with one analyzer
Allows samples to be taken from the process stream without product loss
Supports laboratory verification of process measurement results
Modular configuration designed for installation at the sampling location
Listed fluid-velocity range of 3 to 15 ft/s